CivilEzy by WinCentre Login
WINCENTRE · CIVILEZY · INTERACTIVE E-BROCHURE

Civil PSC
B.Tech Level Course

Everything inside your membership for Assistant Engineer and the graduate-level civil posts, explained page by page.

ഇംഗ്ലീഷ് + മലയാളം ക്ലാസ്സുകൾ

23Courses
612Chapters
3,626Lessons
207Free Previews

Video · Smart Lesson · Rank Booster · Quiz on every topic — then cumulative exams across everything you have studied.

Interactive e-brochure — tap any course to open it

“Our course is not just video classes — it is a system for learning through training — without boring sections.”

— Santhosh Sir · CivilEzy
01
Only at this level

Rank Booster

Knowing the formula gets you the mark. Knowing when it stops being true gets you the rank. Every major concept carries one of these.

📐 The assumption

What standard theory quietly assumes — stated out loud, so you know it is there.

✅ Valid when

The conditions under which the textbook answer is the right answer.

⚠️ Breaks when

The edge case where it fails — exactly where the hard questions live.

🎯 The exam angle

How GATE, IES and the AE paper have actually asked it, and the trap most candidates fall into.

Alongside these sit numerical practice problems with full step-by-step solutions and a formula sheet in every smart lesson. Neither exists at the lower levels.
02
How it works

Five steps on every topic

1
WATCH

Video Class

Santhosh Sir teaches the topic at Assistant Engineer depth, from first principles to the exam-level treatment.

2
DO

Smart Interactive Lesson

Flashcards, mind map, formula sheet and exam mode — plus the Rank Booster blocks that only exist at this level.

3
SOLVE

Numerical Practice

Worked problems with the full step-by-step solution, the way the AE paper expects you to set them out.

4
TEST

Practice Quiz

Test that one topic straight away, while it is still fresh.

5
TRAIN

Cumulative Exam

Everything studied so far — not just the chapter you just finished.

925Video Classes
486Smart Lessons
527Practice Quizzes
154Cumulative Exams
254Malayalam Audio
64Revision PDFs
About the Malayalam audio: 254 audio revisions cover many topics but not every one. At this level most students work from the video and the smart lesson — we would rather say that than promise audio on all 612 chapters.
03
Why it works

The exams are cumulative

An ordinary course

Finish Chapter 5, get a Chapter 5 test, pass it, and quietly forget Chapters 1 to 4.

CivilEzy

Finish Chapter 5 and the exam covers Chapters 1 to 5. Nothing fades, because the real paper will not ask politely.

The Practice Exams course holds 154 cumulative exams, and a POWERFLOW route map tells you which subject to take next.

04
Your progress

Graded, with a real marksheet

Quality, not quantity. You can always move on — but the grade tells you the truth about whether you should.

A90–100
B80–89
C70–79
D60–69
E50–59
F0–49
LessonScoreGrade
Practice Quiz – Stress and Types76% C
Practice Quiz – Theorems of Moment of Inertia94% A
Overall grade85% B
Aim for an A before you move on. Nothing stops you and it is not compulsory — but keep it in mind. Quality is what matters, not quantity.
05
Motivation

Points, badges and a leaderboard

Every lesson earns points and every quiz earns more. The badges arrive on their own as you work, and there is a leaderboard if that is what keeps you going.

Beginner Spark25 pts
Learning Explorer100 pts
Knowledge Seeker500 pts
Smart Scholar1,000 pts
Elite Achiever2,500 pts
Mastermind5,000 pts
Prodigy Champion7,500 pts
Grand Master10,000 pts
Living Legend20,000 pts
Hall of Fame30,000 pts
With 3,626 lessons here, Grand Master is genuinely reachable — but only by working through the course, not by skipping ahead. Living Legend and Hall of Fame are for students who go further still.
06
The syllabus

All 23 courses — tap to open

Every subject course opens its first topic as a full free preview — video, smart lesson and quiz together.

1 Engineering Mechanics23 chapters · 154 lessons · 10 free previews ▾
Physical Quantities and Unit SystemsDimensional Formula, Force and InertiaSystem of ForcesComponents, Resolution and Lami's TheoremMoment of Force and CoupleCentroidCentroid of Standard Sections and Centre of GravityMoment of Inertia of Different SectionsTheorems of Moment of InertiaDynamics and Newton's LawsProjectile MotionCircular MotionCentripetal and Centrifugal Force, BankingWork, Energy and PowerCollisions and the Impulse-Momentum PrincipleVibrations, SHM and Spring Mass Systems+6 more
2 Irrigation Engineering39 chapters · 237 lessons · 10 free previews ▾
Irrigation – IntroductionMethods of IrrigationSoil and Classes of Soil WaterSoil Moisture ConstantsDepth & Frequency of IrrigationWater Quality and Crop SeasonsWater Requirements of Crops-important TerminologiesReservoirType of DamsDams Type of DamNon Rigid DamsSpillwaysMeanderingRiver Training WorksDiversion HeadworksDesign of Weir+5 more
3 Highway Engineering27 chapters · 180 lessons · 10 free previews ▾
History of RoadRoad Development & Planning in IndiaClassification & Alignment of HighwayGeometric DesignHighway Geometric DesignHighway Materials – SoilTests on AggregatesTests of AggregatesBitumen- Types and ApplicationsTests on BitumenPavement DesignTraffic EngineeringConcept & Objectives of Urabn Planning and DevelopmentTown Planning Stages of DevelopmentTown Planning – Theories of Development
4 Building Materials39 chapters · 245 lessons · 10 free previews ▾
TimberMortarIron and SteelCementLimePozzolanic MaterialsClay ProductsConcreteStructural SteelGlassPaintVarnish and DistemperNon Ferrous MetalsAlloyMiscellaneous
5 Environmental Engineering I26 chapters · 197 lessons · 11 free previews ▾
Water DemandPopulation ForecastingSources of WaterPhysical Water Quality ParametersChemical Water Quality ParameterBiological Water Quality ParameterTreatment of WaterDistribution1 : Full Revision
6 Strength of Materials37 chapters · 216 lessons · 10 free previews ▾
Mechanics of Solids-basicsStress and TypesStrain and TypesStress Strain DiagramHooke's Law and Elastic ConstantsMechanical PropertiesNumericalsTypes of Supports and BeamsTypes of Loads and Support ReactionsShear Force & Bending Moment-conceptSfd BmdSfd Bmd MCQMembers in Series and ParallelThermal StressComplex StressPrincipal Planes and Stresses+14 more
7 Airport Engineering6 chapters · 38 lessons · 11 free previews ▾
Airport ComponentsAirport classification & Aircraft componentsAircraft characteristicsRunway designVisual aids
8 Geotechnical Engineering69 chapters · 399 lessons · 11 free previews ▾
Geotechnical engineering-IntroductionBasic properties of soilsBasic properties of soils mcqs discussionRelations-Properties of soilsWater content determinationSpecific gravity determinationGrain size analysisSedimentation analysisGradation curve and soil propertiesRelative densityConsistency limitsThixotropy & ActivityClassification of soilsPermeability of soilsConsolidationConsolidation MCQ and Numericals+12 more
9 Design of Concrete Structures28 chapters · 201 lessons · 11 free previews ▾
Introduction to Concrete StructuresIS Codes and Grades of ConcreteProperties of ConcreteWorking Stress Method – Concept and DefinitionsAnalysis of BeamAnalysis of Beam – Balanced, Urs and OrsDesign of BeamLimit State Method -concept and DefinitionStress Strain RelationshipAnalysis of Beam – Moment of ResistanceBalanced, Under and Over Reinforced BeamCodal Provisions-iCodal Provisions -iiShearTorsionBond+5 more
10 Building Construction36 chapters · 210 lessons · 10 free previews ▾
FoundationArchLintelStone Masonry – Part 1 – IntroStone MasonryBrick MasonryDoors & WindowsStairScaffoldingShorng, UnderpinningFloors & FlooringsFunctional Planning of Building, Pointing & PlasteringCarpentry & JoineryTermite Proofing,roofRoofTall Building, Slip Form, Pre Cast+1 more
11 Surveying & Levelling43 chapters · 221 lessons · 9 free previews ▾
Introduction to SurveyingIntroduction to Surveying- McqChain SurveyingChaining- MCQChain SurveyCompass SurveyingCompass Surveying- MCQPlane Table SurveyLevellingLevelling MCQContouringTheodoliteTraversing and TacheometryCurvesArea and Volume CalculationTotal Station+1 more
12 Quantity Survey & Valuation16 chapters · 88 lessons · 11 free previews ▾
EstimationEstiation
13 Fluid Mechanics34 chapters · 226 lessons · 11 free previews ▾
Chapter 01 – INTRODUCTION – PROPERTIES of FLUIDSChapter 02 – PROPERTIES of FLUIDSChapter 03 – PROPERTIES of FLUIDS-CLASSIFICATION of FLUIDSChapter 04 PRESSURE and its MEASUREMENTSChapter 06 PRESSURE and MEASUREMENTSChapter 07 -PRESSURE MEASUREMENT MCQChapter 08 – HYDROSTATIS FORCES on SURFACESChapter 09 – BUOYANCY & FLOTATIONMetacentre,metacentric Height,equillibriumChapter 11.FLUID KINEMATICSChapter 12. ACCELERATIONChapter 13. FLUID LINESChapter 14. GRADIENT,DIVERGENCE,CURLChapter 15. FLOW NETChapter 16. PITOT TUBE and VENTURIMETERChapter 17.ORIFICEMETER+16 more
14 Structural Analysis25 chapters · 135 lessons · 9 free previews ▾
Introduction 1Static IndeterminacyExternal and Internal Static IndeterminacyStatic Indeterminacy in TrussKinematic Indeterminacy 1Influence Line Diagram (ild)Ild- McqTrussThree Hinged ArchTwo Hinged ArchAnalysis of Beam – Three Moment TheoremMethod of Consistent DeformationMoment Distribution Method – ConceptsFixed End MomentsSinking of SupportsStiffness Matrix ,flexibility Matrix and Slope Deflection Method
15 Open Channel Hydraulics6 chapters · 42 lessons · 10 free previews ▾
Chapter 01.introduction, Difference Bwn Ocf & Pf, Types of FlowChapter 02.types of Flow & Channel, Geometrical PropertiesChapter 03.geometrical Properties, Chezy's Equation, MCQ & PyqChapter 04.most Economical Channel Section,specific Energy,critical FlowChapter 05. Specific Force, Discharge Curve Hydraulic JumpChapter 06.gvf, Water Surface Profile Water Surface Profile, Velocity Distribution
16 Hydrology13 chapters · 64 lessons · 9 free previews ▾
IntroductionForms of PrecipitationMeasurement of PrecipitationRaingauge DensityConsistency and Mass CurveRainfall AnalysisMean PrecipitationInfiltrationHydrographRainfall CharacteristicsUnit HydrographStream Flow Measurements
17 Construction Technology & Management14 chapters · 68 lessons · 9 free previews ▾
Construction SchedulingType of Event and ActivitiesCritical PathRules for Drawing ,numbering and Errors in Network DiagramCpm,pertFloat and Cost ControlConstruction PlanningConstruction Dispute SettlementContractDischarge of ContractCONSTRUCTION SAFETY and CONSTRUCTION EQUIPMENTSMaterial Management
18 Railway Engineering9 chapters · 61 lessons · 10 free previews ▾
History of RailwayRail Sections and Failure of RailCreep and Coning of WheelsSleeperRail Joints and FasteningsGeometric DesignPoints and CrossingsSignal
19 Dock, Harbour & Tunnel Engineering2 chapters · 12 lessons · 6 free previews ▾
Dock and HarbourTunnel
20 Environmental Engineering II28 chapters · 163 lessons · 9 free previews ▾
IntroductionMethods of CollectionMaterials for SewersShape of SewersTest and Ventilation of SewersSewer AppurtenanceDry Weather FlowDesign of SewerSystem of House DrainageDisposal Into RiverDisposal Into LakesDisposal MethodsPreliminary TreatmentGrit ChamberBiological TreatmentDesign Parameters of Tf+8 more
21 Design of Steel Structures12 chapters · 78 lessons · 10 free previews ▾
Chapter 1.properties of Steel and Design Philosophy of Steel StructuresCHAPTER 2. BOLTED CONNECTION : types of bolt and types of jointCHAPTER 3.BOLTED CONNECTION : failure of bolted connection and design of bolted connection contentsChapter 4.welded ConncetionChapter 5.rivetted ConnectionChapter 6.tension MembersChapter 7. Compression MembersChapter 8.design of Built Up Compression MemberChapter 9.column Splice and Column BaseChapter 10. Plate Girder and Gantry GirderChapter 11.flexural MemberChapter 12.roof Truss
22 Practice Exams47 chapters · 297 lessons ▾

47 sets and 154 cumulative exams, worked in order — each set adds the subject you have just finished to everything before it.

23 AE Revision Series33 chapters · 94 lessons ▾

A day-by-day revision run across the whole syllabus, for the final stretch before the exam.

07
Included as well

The Diploma and ITI courses

B.Tech membership carries all three bundles at no extra cost.

649Diploma chapters
3,094Diploma lessons
514ITI chapters
2,466ITI lessons
All three levels together: 1,775 chapters and 9,186 lessons. The B.Tech bundle is the course you are buying; the other two come with it.
08
Questions

Before you enrol

Can I see the course before paying?▾
Yes — 207 lessons are free. Every subject course opens its first topic completely.
Does it include the Diploma and ITI courses?▾
Yes, both — at no extra cost. All three levels together come to 1,775 chapters and 9,186 lessons.
Is every topic available as Malayalam audio?▾
Not every one. There are 254 audio revisions across the bundle, covering many topics. At this level most students work from the video and the smart lesson and use the audio for subjects they want to hear again.
What makes this different from the Diploma course?▾
Depth. Every major concept carries a Rank Booster block — the assumption, when it holds, when it breaks, and the GATE/IES angle — plus numerical practice with full solutions and a formula sheet. None of that exists at the lower levels.
What is the difference between monthly and yearly?▾
Monthly is ₹2,500 and renews automatically until you cancel. Yearly is a one-time ₹20,000 for 365 days — ₹10,000 less than paying monthly for a year.

Start with the free previews

207 lessons are open across the subject courses.

₹2,500 / month
or ₹20,000 for the full year — saves ₹10,000
Monthly renews automatically and can be cancelled any time.
Enrol now
Chat